Home                          Actualizaciones                              Contacto                               Link                            Mapa del sitio

 

 

 

 

 

 

 

LO MAS NUEVO EN COMUNICACIONES.


Recientemente Yaesu lanzo el nuevo transceptor FTDX 5000 MP con  grandes prestaciones por fin se logro eliminar los ruidos de banda con una moderna tecnología



Description
The Yaesu FTdx5000MP was announced in November 2009. The transceiver features an impressive 112 dB dynamic range and an IP3 (3rd Order Intercept Point) of +40 dBm (CW, 500 Hz). Newly designed roofing filters are selectable between 300 Hz, 600 Hz, 3 kHz, 6 kHz and 15 kHz. DSP features are powered by two 32-bit processors from Texas Instruments (TMS320C6727B) both running at 300 MHz. Each VFO has its own DSP processor. RF output comes from a pair of VRF150 FETS yielding 200 W.
Besides the main display there is a large multi-functional analogue meter (same as in the FTdx-9000) and three sub-displays to indicate sub-frequency, graphical wave and menu functions.

The Station Monitor SM-5000 is optional with the FTdx5000MP
Type
Desktop Amateur HF/VHF Transceiver 
Frequency range RX
0.03-60 MHz 
TX
10-160 m + WARC / 50-54 MHz 
Frequency stability
±0.05ppm OCXO 
Tuning steps
 
Modulations RX
AM / FM / CW / USB / LSB / RTTY 
TX
AM / FM / CW / USB / LSB / RTTY 
Filters
15 / 6 / 3 kHz, 600 / 300 Hz 
Receiver system
Triple conversion Super-heterodyne + DSP 
IF-frequencies
1st: Main: 9 MHz, Sub: 40.455 MHz
2nd: Main: 30 kHz (SSB/CW), 24 kHz (FM/AM), Sub: 455 kHz
3rd: Main: 30 kHz (SSB/CW), 24 kHz (FM/AM) 
Sensitivity
 
Selectivity
 
Image rejection
 
Aerial
50 Ω, SO-239 
RF-output
200 W 
Audio output
 
Memories
 
Power requirements
Mains 
Current drain RX
 
TX
 
Dimensions
462 × 135 × 389 mm (18.19 × 5.31 × 15.31 in) (w/o knobs)
Weight
21 kg (46.3 lbs) (SM-5000: 3 kg / 6.6 lbs) 
Manufactured
Between 2009 and 201x in Japan
Features
DSP
Dual-RX
RS-232 computer interface (no USB!) 
Files
Yaesu FTdx5000 Operation manual - part 1
Yaesu FTdx5000 Operation manual - part 2

VOLVER